Hi All, this issue is driving me nuts, on cold start I get a momentary rattle after running for around 15 seconds, it happens when idle passes down through 1600RPM and only lasts 5-10 seconds before going away. I'd swear its Cam chain rattle from the sounds of it but she has new tensioners and everything measures perfectly. Bike has 10000 Kms on her and she's a 2008. I have the valve cover off and all valves are measuring within tolerance, actually a little on the looser end of in Spec which is how I assume she was down from the factory. Do I pull the head and try to figure it out or button her up and ride and learn to live with the noise? Once warmed up she's quiet as a mouse and won't make the noise again until a cold start.