Differences

This shows you the differences between two versions of the page.

--- frame_and_body:centre_stand_spring [2017/05/22 18:02] – created sb66
+++ frame_and_body:centre_stand_spring [2017/05/23 11:00] (current) – sb66
@@ Line 1: / Line 1: @@
-test
+==== Centre Stand Spring ====
+Getting the Centre Stand (or any other) Spring back on can be a bit tricky.
+The potential for skinned knuckles or a visit to the local casualty dept is high.
+One method is to use coins or washers to extend the spring.
+Hold the spring in a vice and bend to one side. This will expose gaps between the coils and it's easy to slip coins in.
+Bend it in the opposite direction and put coins in the other side.
+Fit the spring and then pull out the coins with pliers.
+== Fitting Washers ==
+{{:frame_and_body:stand_1.jpg?400|}}
+== Fitting Spring to Centre Stand ==
+{{:frame_and_body:stand_2.jpg?400|}}